Authentication is required to post a question, start a discussion, or open a profile page.
Language
We set the language based on your browser settings
Keep it or continue in the current language.
Samsung Galaxy A7 (2016) SM-A710
Q&A
User questions and answers about Samsung Galaxy A7 (2016) SM-A710
- tips, troubleshooting, and real experiences from the community.
Question 🤔
1670
V
Vasudev1
2018-02-02
Hi there!! i have a query regarding my samsung galaxy A7 sm-A710FD(2016) i need to get my battery replaced and the samsung service center people are telling that the touch key has to be replaced along with the battery but you never did that in your video. Are they adding useless charges?what else should be replaced? is there any risk to the lcd while removing the battery.
Hi, you \ or a specialist mustn't replace any part instead of the battery. The risk is real. Don't do it without an experience. Don't lever the battery by force!
Hi, contacts are located on a bottom flex cable and are connected to metal frame (housing). Instead, it has two coaxial cables, try to inspect their connections.
What are the specifications of the original A7 (2016) charger, please? I do not have the original and
i am using the original Samsung charger, however, of the Galaxy J5 which has the current of 1.0A. Can I continue using it normally? Thanks in advance.
Many thanks for the reply! So I think the recommended current should be at least 2A, right? Oh, I forgot to congratulate you on the great video. I even downloaded it.
Hello, at the end of this video https://youtu.be/nfw7BgY50lY the battery is stayed lay inside the housing. Because it has glued, so hard! You have to warm it up with heat gun and separate it very! carefully.
Cuz i have a big issue, I accdientally ripped off actually changing the back cover , do this make future probles if I dont use the NFC in other functions?
Hello, it's difficult, replacement demands separation of display from a frame, because of touch buttons are located between them and connected to the bottom board (lower). What do you need it for?
Hello, yes it is. But the battery is glued tightly, you have to warm up surface of the battery (use heat gun or hair dryer) for carefully separating. Be careful, from the other side is a display which is so fragile.
Vasudev1
2018-02-02#1004 UNKNOWN3
2017-06-29hideki chang20
2017-05-29Amaury Souza8
2017-05-16Dhankumar Yadav17
2017-05-16Rakesh Palshetkar4
2017-04-22BADSHAH LIVE5
2017-04-10German De Anda12
2017-04-08Сергей К13
2017-04-057anashMalaysia17
2017-03-16