Disassembly/Repair of the mobile device Samsung Galaxy S8 SM-G950 (Samsung G950F (Europe, Global Single-SIM); G950FD (Global Dual-SIM); G950U (USA Unlocked); G950A (AT&T); G950P (Sprint); G950T (T-Mobile); G950V (Verizon); G950R4 (US Cellular); G950W (Canada); G950S/G950K/G950L (South Korea); G9500 (China)) with each step description and the required set of tools.

Using the key tool, open the SIM and Micro SD cards tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Open the back cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts in the frame of the phone.

Remove the covers with NFC tag and buzzer (speaker).

Disconnect connectors on the PCB.

Lift up the PCB, disconnect the inter-board connector from the inside and remove the main PCB.

Disconnect the connector on PCB, and remove the front (selfie) camera.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB. Pry up the connector and remove the headphone jack/socket. 

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts in the lower PCB.

Remove the lower PCB.

Pry and remove the vibration motor.

Parts are in the frame of the display module.