Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Samsung Galaxy S4 Mini Duos GT-I9192 (Samsung GT-I9192i) with each step description and the required set of tools.
6643
Views
0
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the bracket
Remove the bracket holding the front (selfie) camera and proximity sensor.
Step 6.
Remove the front camera
Pry up connectors and remove the front (selfie) camera and cable with a proximity sensor and earpiece speaker.
Step 7.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 8.
Remove the sub-board
Lift up the board, disconnect the connector from the inside and remove it.
Step 9.
Remove the sub-board
Disconnect the connector on the lower PCB and remove it.
Step 10.
Remove the cable
Remove the cable with SIM and Micro SD card holders.
Step 11.
Remove the headphone port
Pry and remove the headphone jack/socket and vibration motor.
Step 12.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
6643
Views
0
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Samsung instructions most liked by readers
New instructions
Check our
New Samsung brand instructions on vrm24.com
