Recommended tools
Screwdriver Torx T5
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Alcatel OT Idol 2 Mini L 6014X (Alcatel OneTouch Idol 2 Mini L) with each step description and the required set of tools.
4742
Views
1
Likes
—
Share
7
Questions
Step 1.
Remove the tray
Using the key tool, open the SIM card slot and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (1.5 mm crosshead) unscrew 3 bolts in the lower part and using a screwdriver (hex T5) unscrew 5 bolts in the upper part.
Step 4.
Remove the loudspeaker
Pry and remove the bottom part with buzzer (speaker).
Step 5.
Open the cover
Remove the upper cover.
Step 6.
Remove the battery
Disconnect the connector on the PCB and remove the battery.
Step 7.
Remove the coaxial cable
Disconnect the connectors on the PCB and remove the coaxial cable.
Step 8.
Remove the sub-board
Disconnect the connectors on the lower PCB and remove it.
Step 9.
Remove the rear camera
Disconnect the connector on PCB and remove the main camera.
Step 10.
Disconnect the connector
Disconnect the connector on the PCB.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4742
Views
1
Likes
—
Share
7
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
