Disassembly/Repair of the mobile device Huawei Ascend P7 (Huawei Ascend P7 (P7-L10)) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card and MMC card trays and remove them.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
âš Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connector.
Step 4.
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5.
Disconnect connectors and remove the coaxial cable.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts in the frame of the phone.
Step 7.
Pry and remove the lower cover.
Step 8.
Pry and remove the upper bracket.
Step 9.
Disconnect connector on the PCB and remove the flat cable with the headphone jack/socket & vibration motor.
Step 10.
Disconnect connectors on the PCB.
Step 11.
Remove the PCB.
Step 12.
Pry and remove the buzzer (speaker) assembly.
Step 13.
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions