Recommended tools

Heat gun

Screwdriver Torx Т2

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly/Repair of the mobile device Huawei Nova 2 Plus (Huawei Nova 2 Plus BAC-L03 (Europe, Global Single-SIM) BAC-L21 BAC-L23 (Global Dual-SIM) BAC-AL00 (China)) with each step description and the required set of tools.

12474

Views

Likes

—

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Remove the tray

Using the key tool, open the SIM card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Step 2.

Unscrew the screws

Using a screwdriver (hex T2), unscrew the 2 bolts on the end of the phone.

Step 3.

Open the display module

Separate the display module from cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.

Step 5.

Open the display module

Disconnect the display module connector and remove it.

Step 6.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts.

Step 7.

Open the mid-frame

Pry and remove the middle frame.

Step 8.

Remove the interconnect cable

Disconnect connectors and remove inter-board cable.

Step 9.

Disconnect the connectors

Disconnect connectors on the lower PCB.

⚠ Warning!

The connector of the coaxial cable locates on the inside.

Step 10.

Remove the sub-board

Remove the lower PCB.

Step 11.

Remove the headphone port

Pry & and remove the headphone jack/socket.

Step 12.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Step 13.

Disconnect the connectors

Disconnect connectors on the PCB.

Step 14.

Remove the motherboard

Remove the PCB.

Step 15.

Remove the cameras

Disconnect connectors on the PCB and remove the main and front (selfie) cameras.

Step 16.

In the display frame remained

Parts in the frame of the display module.

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 12 minutes in time. Our manual is suitable for all models Huawei Nova 2 Plus or Huawei Nova 2 Plus BAC-L03 (Europe, Global Single-SIM) BAC-L21 BAC-L23 (Global Dual-SIM) BAC-AL00 (China) released for markets in different countries.

#instructions #Huawei #Huawei Nova 2 Plus