Disassembly/Repair of the mobile device Huawei Honor 6A (Huawei Honor 6A DLI-TL20) with each step description and the required set of tools.

14276

Views

—

Share

20

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Unscrew the screws

Step 1.

Unscrew the screws

Using a screwdriver (hex T2), unscrew the 2 bolts on the end of the phone.

Remove the tray

Step 2.

Remove the tray

Using the key tool, open the SIM card tray and remove it.

âš  Warning!

Do not push too hard this may cause damage.

Open the back cover

Step 3.

Open the back cover

Open the back cover.

Remove the bracket

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Disconnect the battery connector

Step 5.

Disconnect the battery connector

Disconnect the battery connector.

âš  Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Disconnect the connector

Step 6.

Disconnect the connector

Disconnect the fingerprint cable connector.

Remove the bracket

Step 7.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connector.

Unscrew the screws

Step 8.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts.

Remove the antenna

Step 9.

Remove the antenna

Pry and remove the cover with antennas.

Unscrew the screws

Step 10.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts.

Remove the loudspeaker

Step 11.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Remove the interconnect cables

Step 12.

Remove the interconnect cables

Disconnect connectors and remove inter-board cable & coaxial cable.

Remove the sub-board

Step 13.

Remove the sub-board

Remove the lower PCB.

Disconnect the connectors

Step 14.

Disconnect the connectors

Disconnect connectors on the PCB.

Unscrew the screws

Step 15.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.

Remove the motherboard

Step 16.

Remove the motherboard

Remove the PCB.

Remove the earpiece speaker

Step 17.

Remove the earpiece speaker

Pry and remove the earpiece (speaker).

In the display frame remained

Step 18.

In the display frame remained

Parts in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has hard complexity and takes about 12 minutes in time. Our manual is suitable for all models Huawei Honor 6A or Huawei Honor 6A DLI-TL20 released for markets in different countries.
#instructions #Huawei #Huawei Honor 6A
Detailed disassembly instructions of Huawei Honor 6A in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

14276

Views

—

Share

20

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com