Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device LG X Power 2 M320 (LG X Power 2 M320) with each step description and the required set of tools.
9620
Views
0
Likes
—
Share
8
Questions
Step 1.
Remove the trays
Using the key tool, open the SIM card and MMC card trays and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Disconnect the battery connector
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 7.
Remove the front camera
Disconnect connector on the PCB and remove the front (selfie) camera.
Step 8.
Disconnect the connector
Disconnect connector on the PCB.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
9620
Views
0
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top LG instructions most liked by readers
New instructions
Check our
New LG brand instructions on vrm24.com
