Disassembly/Repair of the mobile device Samsung Galaxy A7 (2017) SM-A720 (Samsung A720F (Global Single-SIM); A720F/DS (Global Dual-SIM)) with each step description and the required set of tools.

Using the key tool, open the SIM and Micro SD card trays and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Open the back cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.

Remove covers. The wide one is with NFC tag.

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Pry and remove the lower cover.

Disconnect the connector on PCB, and remove the front (selfie) camera.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

Disconnect connectors on the PCB.

Remove the PCB.

Pry and remove the vibration motor.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the headphone jack/socket.

Parts are in the frame of the display module.