Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Samsung Galaxy Core 2 SM-G355H (Samsung Galaxy Core 2 Dual Sim) with each step description and the required set of tools.
10990
Views
3
Likes
—
Share
33
Questions
Step 1.
Open the back cover
Open the back cover and remove the cover hiding the connector.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Disconnect the connector
Pry up the display connector.
Step 4.
Open the display module
Separate the display module.
âš Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Step 6.
Remove the vibration motor
Remove the lower cover with vibration motor and Home button.
Step 7.
Remove the motherboard
Remove the PCB.
Step 8.
In the display frame remained
The frame.
Step 9.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Step 10.
Remove the front camera
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 11.
Remove the motherboard
Separate the PCB from the cover.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
10990
Views
3
Likes
—
Share
33
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Samsung instructions most liked by readers
New instructions
Check our
New Samsung brand instructions on vrm24.com
