Disassembly/Repair of the mobile device Samsung Galaxy S8 Plus SM-G955 (Samsung G955F (Europe, Global Single-SIM); G955FD (Global Dual-SIM); G955W (Canada); G955A (AT&T); G955P (Sprint); G955T (T-Mobile); G955V (Verizon); G955R4 (US Cellular); G955U (USA Unlocked); G955S/G955K/G955L (South Korea); G9550 (China)) with each step description and the required set of tools.

Open the back cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Using the key tool, open the SIM card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.

Remove the covers and NFC tag.

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Pry and remove the buzzer (speaker) assembly.

Disconnect connectors on PCB and remove the main and front (selfie) cameras.

Separate the battery from the display frame.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Disconnect connectors on the PCB.

Lift the PCB up, disconnect the connector from the inside and remove it.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt. Pry up the connector and remove the headphone jack/socket.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower PCB.

Remove the lower PCB.

Pry & remove the vibration motor and proximity sensor.

Parts are in the frame of the display module.