Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus ZenFone C ZC451CG with each step description and the required set of tools.
4239
Views
1
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker).
Step 6.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.
Step 7.
Remove the vibration motor
Disconnect the connector on the lower board and remove the vibration motor.
Step 8.
Disconnect the connectors
Disconnect connectors on the lower PCB.
Step 9.
Remove the sub-board
Remove the lower PCB.
Step 10.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 11.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 12.
Remove the motherboard
Overturn the main board, disconnect the connectors from the inside and remove the board.
Step 13.
Remove the earpiece speaker
Pry and remove the coaxial cable and earpiece speaker.
Step 14.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4239
Views
1
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
