Disassembly/Repair of the mobile device Asus ZenFone Max Pro ZB602KL with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM and Micro SD cards tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts in the frame of the phone.
Step 4.
Lift the cover with a fingerprint sensor.
Step 5.
Pry up the connector and remove the cover with a fingerprint sensor.
Step 6.
Disconnect the battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 7.
Remove the fingeprint sensor.
Step 8.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts.
Step 9.
Pry and remove the buzzer (speaker) assembly.
Step 10.
Separate the battery from the display frame.
Step 11.
Disconnect connectors on the daughterboard.
Step 12.
Remove the daughterboard.
Step 13.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 14.
Disconnect the connector on PCB, and remove the assembly of two rear cameras.
Step 15.
Disconnect connectors on the PCB.
Step 16.
Remove the PCB.
Step 17.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions