Disassembly/Repair of the mobile device Asus ZenFone 5 ZE620KL with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card slot and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
⚠ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 3.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 8 bolts at the top.
Step 4.
Remove the top panel.
Step 5.
Disconnect the fingerprint connector and battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 6 bolts at the bottom of the phone.
Step 7.
Remove the panel with the speaker and antennas at the bottom.
Step 8.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 1 bolt in the lower PCB.
Step 9.
Disconnect the connectors and remove inter-board cable.
Step 10.
Disconnect the connectors on the lower PCB and remove it.
Step 11.
Disconnect the connector on PCB and remove the front (selfie) camera.
Step 12.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.
Step 13.
Disconnect the connectors on PCB.
Step 14.
Remove the PCB.
Step 15.
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions