Recommended tools
Screwdriver Torx T4
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei Y6 II (Huawei Y6II CAM-l21) with each step description and the required set of tools.
9361
Views
5
Likes
—
Share
8
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.
Step 3.
Unscrew the screws
Using a screwdriver (hex T4), unscrew 4 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Disconnect the battery connector
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Remove the interconnect cable
Disconnect connectors and remove the inter-board cable.
Step 7.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 8.
Disconnect the connector
Disconnect the connector on the PCB.
Step 9.
Remove the sub-board
Remove the lower PCB.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Remove the front camera
Disconnect connector on the PCB and remove the front (selfie) camera.
Step 12.
Remove the motherboard
Remove the PCB.
Step 13.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
9361
Views
5
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
