Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Eject tool
Disassembly/Repair of the mobile device Lenovo S60 (Lenovo S60-A) with each step description and the required set of tools.
5665
Views
1
Likes
—
Share
54
Questions
Step 1.
Remove the trays
Using the key tool, open the SIM cards and MMC card trays and remove them.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the battery connector.
Step 4.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts in the lower part.
Step 6.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 7.
Remove the interconnect cables
Disconnect connectors and remove the inter-board and coaxial cable.
Step 8.
Remove the sub-board
Pry & remove the lower board.
Step 9.
Remove the cable
Pry up the power & volume buttons flex cable.
Step 10.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the bracket holds the cameras.
Step 11.
Remove the cameras
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
Step 12.
Turn over the PCB
Overturn the board, disconnect the connector from the inside and remove it.
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5665
Views
1
Likes
—
Share
54
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Lenovo instructions most liked by readers
New instructions
Check our
New Lenovo brand instructions on vrm24.com
