Disassembly/Repair of the mobile device LeEco Le 2 X527 (LeTV LeEco Le 2 X527) with each step description and the required set of tools.

11782

Views

—

Share

109

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the trays

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

âš  Warning!

Do not push too hard this may cause damage.

Open the display

Step 2.

Open the display

Separate the display module from the cover.

âš  Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Remove the bracket

Step 3.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws and remove the bracket holding the display connectors.

Disconnect the connector

Step 4.

Disconnect the connector

Disconnect the display module connector.

Unscrew the screws

Step 5.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 screws.

Open the mid-frame

Step 6.

Open the mid-frame

Open the middle cover.

Disconnect the battery connector

Step 7.

Disconnect the battery connector

Disconnect the battery connector. The battery model of LeTV LeEco Le 2 X527 is LTF21A.

âš  Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Remove the earpiece speaker

Step 8.

Remove the earpiece speaker

Pry and remove an earpiece speaker.

Remove the front camera

Step 9.

Remove the front camera

Disconnect the connector on PCB, and remove the front (selfie) camera.

Unscrew the screws

Step 10.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws in the PCB.
Disconnect the connectors

Step 11.

Disconnect the connectors
Disconnect connectors on the PCB.
Remove the motherboard

Step 12.

Remove the motherboard
Turn the PCB over, pry up the coaxial cable connector and remove the PCB.
Unscrew one screw

Step 13.

Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw in the daughterboard.
Remove the battery

Step 14.

Remove the battery
Remove the battery.
Remove the sub-board

Step 15.

Remove the sub-board

Peel back the inter-board cable and turn the sub-board over. Pry the coaxial cable connector and remove the board.

Remove the loudspeaker

Step 16.

Remove the loudspeaker
Pry and remove the buzzer (loudspeaker) assembly.
In the housing remained

Step 17.

In the housing remained
The back cover.
Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has hard complexity and takes about 14 minutes in time. Our manual is suitable for all models LeEco Le 2 X527 — LeTV LeEco Le 2 X527 released for markets in different countries.
#instructions #LeEco #LeEco Le 2 X527
Detailed disassembly instructions of LeEco Le 2 X527 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

11782

Views

—

Share

109

Questions

Top instructions

Check our Top LeEco instructions most liked by readers

New instructions

Check our New LeEco brand instructions on vrm24.com