Recommended tools

Heat gun

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly/Repair of the mobile device Samsung Galaxy Note FE SM-N935 (Samsung Galaxy Note 7, Samsung N935F/DS (Malaysia, Philippines); N935S, N935K, N935L (Korea)) with each step description and the required set of tools.

5762

Views

Likes

—

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Step 2.

Remove the stylus pen

Pull out the S pen (AKA stylus).

Step 3.

Open the back cover

Open the back cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 4.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 screws.

Step 5.

Open the cover

Open the cover with the NFC tag.

Step 6.

Disconnect the battery connector

Disconnect the battery connector. The battery model of Samsung Galaxy Note FE is EB-BN935ABE.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 7.

Remove the loudspeaker

Pry and remove the buzzer (loudspeaker) assembly.

Step 8.

Remove the front camera

Disconnect the connectors on PCB, and remove two front (selfie) cameras.

Step 9.

Disconnect the connectors

Disconnect connectors on the main PCB.

Step 10.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws in the PCB.

Step 11.

Remove the motherboard

Lift the PCB, disconnect the inter-board connector, and remove the mainboard.

Step 12.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws in the daughterboard.

Step 13.

Remove the headphone port

Pry up the connector on PCB and remove the headphone jack/socket.

Step 14.

Remove the sub-board

Remove the daughterboard, also known as sub-board.

Step 15.

In the display frame remained

Parts are in the frame of the display module.

Step 16.

Remove the rear camera

Disconnect the connector on PCB, and remove the main camera.

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has medium complexity and takes about 14 minutes in time. Our manual is suitable for all models Samsung Galaxy Note FE SM-N935 — Samsung Galaxy Note 7, Samsung N935F/DS (Malaysia, Philippines); N935S, N935K, N935L (Korea) released for markets in different countries.

#instructions #Samsung #Samsung Galaxy Note FE SM-N935