Recommended tools
Screwdriver Five-point P1.2 mm
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device vivo V7 Plus with each step description and the required set of tools.
11002
Views
5
Likes
—
Share
4
Questions
Step 1.
Remove the trays
Using the key tool, open the SIM and Micro SD cards tray and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Unscrew the screws
Using a screwdriver (Star Shape 1.2mm Pentalobe), unscrew 2 screws at the end of the phone.
Step 3.
Open the back cover
Open the back cover and turn it over.
Step 4.
Open the cover
Pry up the fingerprint sensor connector and remove the cover.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws.
Step 6.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 screws.
Step 7.
Open the cover
Remove the cover hiding the PCB.
Step 8.
Disconnect the battery connector
Disconnect the battery connector. The battery model of vivo V7 Plus is B-C9.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 9.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 screws.
Step 10.
Remove the loudspeaker
Pry and remove the buzzer (loudspeaker) assembly.
Step 11.
Remove the coaxial cable
Disconnect the connectors and remove the coaxial cable.
Step 12.
Disconnect the connector
Disconnect the connector on the daughterboard.
Step 13.
Remove the sub-board
Remove the daughterboard, also known as sub-board.
Step 14.
Remove the interconnect cable
Pry up the connector and remove the inter-board cable.
Step 15.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 screws securing the battery.
Step 16.
Remove the battery
Pry up the connector, lean the display cable back and remove the battery.
Step 17.
Remove the rear camera
Disconnect the connector on PCB, and remove the main camera.
Step 18.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws.
Step 19.
Remove the motherboard
Remove the PCB.
Step 20.
Remove the front camera
Disconnect the connector on PCB, and remove the front (selfie) camera.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
11002
Views
5
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Popular Questions
vivo V20 SE
I want to buy complete motherboard
chahmad
M
HTC One E8
I change the battery and now it does not recognize the two sim cards and the rear camera does not work. Everything else perfect. What can I do?
Melquisedec Daniel12
Z
Asus ZenFone 6 A600CG
oh damn i following ur step then somehow u skipped on 9:10 .how u put the red and wire back together ..and how to change the battery .can u show me h…
Zul Aiman18
Samsung Galaxy Watch Active 2 SM-R820
I can't open is it Possible to do without a screwdriver
andrew
T
Xiaomi RedMi Note 4X
Nice job, congratulations from Spain!
Titi Tom11Top instructions
Check our
Top vivo instructions most liked by readers
New instructions
Check our
New vivo brand instructions on vrm24.com
