Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus ZenFone 5 A501CG with each step description and the required set of tools.
5211
Views
1
Likes
—
Share
43
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 13 bolts in the frame of the phone.
Step 3.
Open the mid-frame
Pry and remove the middle frame.
Step 4.
Remove the battery
Disconnect the connectors, including the display cable connector, on the printed circuit board and remove the battery with SIM card holders.
Step 5.
Remove the loudspeaker
Disconnect connectors on the lower PCB and remove the buzzer (speaker) assembly.
Step 6.
Remove the sub-board
Disconnect the coaxial cable connector on the lower PCB, remove the vibration motor and remove the lower board with the charging port.
Step 7.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 8.
Remove the motherboard
Remove the PCB.
Step 9.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5211
Views
1
Likes
—
Share
43
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
