Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Explay Tornado with each step description and the required set of tools.
4510
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
In the middle cover
The middle frame.
Step 6.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 7.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 8.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 9.
Remove the sub-board
Overturn the board, disconnect the connectors from the inside and remove it.
Step 10.
Remove the sub-board
Remove the lower PCB and coaxial cable.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4510
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Explay instructions most liked by readers
New instructions
Check our
New Explay brand instructions on vrm24.com
