Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Explay Infinity 2 with each step description and the required set of tools.
4730
Views
1
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the buttons
Remove the keys of the volume and power buttons.
Step 6.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the main PCB and 1 bolt in the lower board.
Step 7.
Remove the sub-board
Disconnect the connector on the main board and the coaxial cable connector on the bottom board and remove the buzzer (speaker) assembly & the bottom board.
Step 8.
Remove the vibration motor
Disconnect connectors on the PCB and pry up vibration motor & power & volume button flex cable.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
In the display frame remained
Parts in the frame of the display module.
Step 11.
Remove the cable
Disconnect the connector on the main board and remove the cable with the Sim connectors.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4730
Views
1
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Explay instructions most liked by readers
New instructions
Check our
New Explay brand instructions on vrm24.com
