Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Explay Indigo with each step description and the required set of tools.
4471
Views
1
Likes
—
Share
14
Questions
Step 1.
Remove the trays
Using the key tool, open the SIM card and MMC card trays and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Step 4.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 5.
Open the mid-frame
Pry and remove the middle frame.
Step 6.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 7.
Disconnect the connector
Disconnect the coaxial cable connector on the lower board.
Step 8.
Remove the cameras
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
⚠ Warning!
On the PCB, this device has no coaxial cable connector.
Step 10.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4471
Views
1
Likes
—
Share
14
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Explay instructions most liked by readers
New instructions
Check our
New Explay brand instructions on vrm24.com
