Disassembly/Repair of the mobile device HOMTOM HT70 with each step description and the required set of tools.

6120

Views

—

Share

25

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the trays

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Unscrew the screws

Step 2.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 screws on the sides of the phone and remove the side covers.
Unscrew the screws

Step 3.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 screws on both sides.
Open the back cover

Step 4.

Open the back cover

Open the back cover.

Unscrew the screws

Step 5.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 screws.
Open the cover

Step 6.

Open the cover
Peel back the cables with cameras, fingerprint sensor, flash and remove the cover.
Remove the battery

Step 7.

Remove the battery
Disconnect the connector on PCB and remove the battery.
Remove the fingerprint sensor

Step 8.

Remove the fingerprint sensor
Disconnect the connector on PCB and remove the fingerprint sensor.
Remove the rear camera

Step 9.

Remove the rear camera
Disconnect the connector on PCB, and remove the main camera.
Disconnect the connectors

Step 10.

Disconnect the connectors
Disconnect connectors on the PCB.
Unscrew the screws

Step 11.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 screws.
Remove the loudspeaker

Step 12.

Remove the loudspeaker

Pry the buzzer (loudspeaker) assembly and turn it over.

⚠ Warning!

The loudspeaker connects to the PCB with wires.

Remove the coaxial cable

Step 13.

Remove the coaxial cable
Disconnect the connector and remove the coaxial cable.
Disconnect the connector

Step 14.

Disconnect the connector
Disconnect the connector on the daughterboard.
Remove the sub-board

Step 15.

Remove the sub-board
Remove the daughterboard with a loudspeaker assembly.
Unscrew the screws

Step 16.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws in the PCB.
Remove the motherboard

Step 17.

Remove the motherboard
Remove the PCB.
Remove the proximity sensor

Step 18.

Remove the proximity sensor
Disconnect the connectors and remove the proximity sensor.
Remove the motherboard

Step 19.

Remove the motherboard
Turn over the PCB, disconnect connectors, and remove the main and front (selfie) cameras.
Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has easy complexity and takes about 17 minutes in time. Our manual is suitable for all models HOMTOM HT70 released for markets in different countries.
#instructions #HOMTOM #HOMTOM HT70
Detailed disassembly instructions of HOMTOM HT70 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

6120

Views

—

Share

25

Questions

Top instructions

Check our Top HOMTOM instructions most liked by readers

New instructions

Check our New HOMTOM brand instructions on vrm24.com