Disassembly/Repair of the mobile device Huawei GR3 (Huawei GR3 TAG-L21) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card and MMC card trays and remove them.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Pry up the cover at the top of the phone hiding the bolts securing the back cover.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts.
Step 4.
Open the back cover.
Step 5.
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower part.
Step 7.
Pry and remove the buzzer (speaker) assembly.
Step 8.
Disconnect connector on the PCB and remove the main camera.
Step 9.
Disconnect connectors on the PCB and pry up vibration motor.
Step 10.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the PCB.
Step 11.
Remove the PCB.
Step 12.
Pry and remove the earpiece (speaker).
Step 13.
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions