Disassembly/Repair of the mobile device Huawei Honor 8 Lite (Huawei Honor 8 Lite PRA-TL10) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM and Micro SD cards tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
⚠ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Also, disconnect the fingerprint sensor connector.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the brackets holding the connectors.
Step 4.
Disconnect the connector and remove the fingerprint sensor cable.
Step 5.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Step 6.
Pry and remove the middle frame.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Step 8.
Remove the buzzer (speaker) assembly.
Step 9.
Disconnect connectors on the PCB.
Step 10.
Remove the lower PCB.
Step 11.
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
Step 12.
Disconnect connectors on the PCB.
Step 13.
Remove the PCB.
Step 14.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions