Disassembly/Repair of the mobile device Huawei Y3 (2017) (Huawei Y3 2017 CRO-U00) with each step description and the required set of tools.

12796

Views

—

Share

13

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Open the back cover

Step 1.

Open the back cover

Open the back cover.

Unscrew the screws

Step 2.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 18 bolts in the frame of the phone.

Open the mid-frame

Step 3.

Open the mid-frame

Pry and remove the middle frame.

Remove the battery

Step 4.

Remove the battery

Disconnect the connector on PCB and remove the battery.

Remove the rear camera

Step 5.

Remove the rear camera

Disconnect the connector on PCB, and remove the main camera.

Disconnect the connectors

Step 6.

Disconnect the connectors

Disconnect connectors on the PCB.

Remove the motherboard

Step 7.

Remove the motherboard

Remove the PCB.

In the display frame remained

Step 8.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about minutes in time.
Our manual is suitable for all models Huawei Y3 (2017) — Huawei Y3 2017 CRO-U00 released for markets in different countries.

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

12796

Views

—

Share

13

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com