Disassembly/Repair of the mobile device LG G2 D802 with each step description and the required set of tools.

Using the key tool, open the SIM card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Open the back cover.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.

Pry and remove the upper cover and buzzer (speaker) assembly. 

Disconnect the connectors on the lower board and two small boards above the main PCB and remove them all.

⚠ Warning!

The lower board connects to two upper boards by two flat cables.

Disconnect the connector and separate the battery. The battery probably glues to the display frame.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Disconnect connector on the PCB and remove the front (selfie) camera.

Disconnect connectors on the PCB.

Remove the PCB.

Pry and remove the main camera.

Pry and remove the vibration motor, proximity sensor and earpiece (speaker).

Parts are in the frame of the display module.