Disassembly/Repair of the mobile device Samsung Wave 2 GT-S8530 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Open the back cover.
Step 2.
Lift and remove the battery.
Step 3.
Pry & remove the top cover.
Step 4.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the top of the phone.
Step 5.
Remove the upper cover.
Step 6.
Slide up and remove the frame.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the bottom cover.
Step 8.
Remove the bottom cover.
Step 9.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.
Step 10.
Remove the keys of navigation buttons.
Step 11.
Remove the cover with antennas.
Step 12.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.
Step 13.
Pry and remove the middle frame.
Step 14.
Turn over the frame with Sim card holder. Pry up the connector and remove the frame.
Step 15.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Step 16.
Disconnect connectors on the PCB and pry up the volume buttons flex cable.
Step 17.
Turn over PCB, disconnect the connectors of from the inside and remove the board.
Step 18.
Remove the cable with a camera and proximity sensor.
Step 19.
Pry and remove the cable with a headphone jack/socket and earpiece speaker.
Step 20.
Remove the board with a vibration motor, Micro SD card holder, and volume buttons.
Step 21.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions