Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Alcatel OT POP 3 5015D (Alcatel OneTouch Pop 3) with each step description and the required set of tools.
3974
Views
2
Likes
—
Share
18
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 6.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 7.
Remove the loudspeaker
Disconnect the connectors on the PCB, pry & remove the vibrator and speaker.
Step 8.
Remove the motherboard
Remove the PCB.
Step 9.
Remove the earpiece speaker
Pry & remove ear speaker.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3974
Views
2
Likes
—
Share
18
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
