Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus MeMO Pad 10 Smart ME301 (Asus MeMO Pad 10 Smart K001, K005, ME302) with each step description and the required set of tools.
6087
Views
1
Likes
—
Share
13
Questions
Step 1.
Remove the tray
Using the key tool, open the SIM card tray and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 4.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts.
Step 5.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 6.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 7.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 8.
Remove the motherboard
Disconnect connectors of upper and lower the buzzers (speakers) assembly and remove PCB.
Step 9.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 10.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
6087
Views
1
Likes
—
Share
13
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
