Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus ZenFone 4 Max ZC520KL with each step description and the required set of tools.
12423
Views
2
Likes
—
Share
24
Questions
Step 1.
Remove the tray
Using the key tool, open the SIM card tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Step 4.
Open the cover
Pry and remove the upper cover.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 6.
Disconnect the connectors
Disconnect connectors on the lower PCB.
Step 7.
Remove the motherboard
Remove the PCB.
Step 8.
Remove the front camera
Disconnect connector on the PCB and remove the front (selfie) camera.
Step 9.
Remove the cameras
Disconnect connectors on the PCB and remove the main cameras.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
12423
Views
2
Likes
—
Share
24
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
