Recommended tools
Screwdriver Torx T5
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device HTC Desire 700 (HTC Desire 700 OP4O100) with each step description and the required set of tools.
4613
Views
0
Likes
—
Share
16
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (hex T5), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the lower PCB.
Step 6.
Disconnect the connectors
Disconnect connectors on the lower PCB.
Step 7.
Remove the motherboard
Remove the PCB.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 9.
Remove the vibration motor
Disconnect connector on the PCB and pry up vibration motor & power button flex cable.
Step 10.
Disconnect the connector
Disconnect the connector from the inside.
Step 11.
Turn over the PCB
Overturn the board, unstick the protective layer, disconnect the connectors and remove it.
Step 12.
Remove the earpiece speaker
Pry & remove the volume button flex cable and earpiece (speaker).
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4613
Views
0
Likes
—
Share
16
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top HTC instructions most liked by readers
New instructions
Check our
New HTC brand instructions on vrm24.com
