Recommended tools

Screwdriver Five-point P0.8 mm

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly/Repair of the mobile device Huawei Honor 6C Pro (Huawei Honor 6C Pro (JMM-L22) (ЕМЕА); Honor V9 Play JMM-AL00/AL10, JMM-TL00/TL10 (China)) with each step description and the required set of tools.

15484

Views

Likes

—

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Remove the trays

Using the key tool, open the SIM card and MMC card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Step 2.

Unscrew the screws

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Step 3.

Open the back cover

Open the back cover.

⚠ Warning!

On the back cover is a fingerprint sensor connected to the main circuit board. Therefore, you need to open it as attentively and carefully, so as not to damage the cable.

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.

Step 5.

Disconnect the connector

Disconnect the fingerprint connector.

Step 6.

In the housing remained

The back cover.

Step 7.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.

Step 8.

Disconnect the battery connector

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 9.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.

Step 10.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Step 11.

Remove the interconnect cable

Disconnect connectors and remove inter-board cable.

Step 12.

Remove the sub-board

Pry up the coaxial cable connector and remove the daughter/sub-board.

Step 13.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw, and remove the bracket holding the main camera connectors.

Step 14.

Remove the rear camera

Disconnect the connector on PCB, and remove the main camera.

Step 15.

Disconnect the connectors

Disconnect connectors on the PCB.

Step 16.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 screws in the PCB.

Step 17.

Remove the motherboard

Remove the PCB.

Step 18.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 14 minutes in time. Our manual is suitable for all models Huawei Honor 6C Pro or Huawei Honor 6C Pro (JMM-L22) (ЕМЕА); Honor V9 Play JMM-AL00/AL10, JMM-TL00/TL10 (China) released for markets in different countries.

#instructions #Huawei #Huawei Honor 6C Pro