Recommended tools
Heat gun
Screwdriver Torx T5
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei P8 Lite (Huawei P8 Lite ALE-L21, PRA-LA1) with each step description and the required set of tools.
11746
Views
4
Likes
—
Share
4
Questions
Step 1.
Remove the trays
Using the key tool, open the SIM card and MMC card trays and remove them.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts and a screwdriver (hex T5), unscrew 4 bolts in the frame of the phone.
Step 4.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly and cover hiding microchips and connectors.
Step 5.
Disconnect the battery connector
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and a screwdriver (hex T5) unscrew 2 bolts.
Step 7.
Disconnect the connector
Pry up the NFC connector.
Step 8.
Remove the frame
Pry & remove the frame with flash.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
Remove the vibration motor
ry and remove the vibration motor.
Step 12.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
11746
Views
4
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
