Disassembly/Repair of the mobile device LG Nexus 4 E960 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Using a screwdriver (hex T5), unscrew the 2 bolts on the end of the phone.
Step 3.
Open the back cover.
Step 4.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew the 2 bolts securing the battery connector.
Step 5.
Disconnect connector on the PCB and remove the battery.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 bolts in the frame of the phone.
Step 7.
Pry and remove the buzzer (speaker) assembly.
Step 8.
Pry and remove the cover with a speaker and vibration motor.
Step 9.
Disconnect connectors on the main PCB and remove the lower board.
Step 10.
Disconnect connectors on the PCB.
Step 11.
Disconnect connector on the PCB and remove the main camera.
Step 12.
Remove the PCB.
Step 13.
Pry & remove the power & volume buttons and proximity sensor.
Step 14.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions