Disassembly/Repair of the mobile device Nokia Lumia 920 RM-820 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Using a screwdriver (hex T5), unscrew 2 bolts on the end of the phone.
Step 3.
Lift up the back cover and remove the bracket holding the charging port connector.
Step 4.
Disconnect the charging port (microUSB) connector and remove the back cover.
Step 5.
The back cover.
Step 6.
Using a screwdriver (hex T5), unscrew 1 bolt and remove the brackets.
Step 7.
Disconnect connector on the PCB and remove the battery and copper layer.
Step 8.
Using a screwdriver (hex T5), unscrew 3 bolts in the right side and a screwdriver (hex T3), unscrew 3 bolts on the PCB.
Step 9.
Disconnect connectors on the PCB.
Step 10.
Separate the display module from frame with PCB.
Step 11.
The display module.
Step 12.
Turn over the board.
Step 13.
Remove the earpiece (speaker), Sim holder cover and main camera with frame.
Step 14.
Remove another frame.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions