Disassembly/Repair of the mobile device Xiaomi Mi Square Box Bluetooth Speaker 2 (Xiaomi Mi Square Box Bluetooth Speaker 2 XMYX03YM) with each step description and the required set of tools.

⚠ Before disassembling, do not forget to turn your gadget off.

Carefully open the cover.

⚠ Pay attention! The microphone is located on the cover from the inside.

Remove the microphone. The microphone is not glued and held by a soft pad.

Using a screwdriver (Phillips 2.5 mm PH00), unscrew 8 screws.

Carefully open the cover.

Open the middle cover.

Disconnect the connector and remove the battery.

Using a screwdriver (Phillips 2.5 mm PH00), unscrew four screws and remove the frame securing the motherboard.

ℹ️ Be sure to note the location of the screws before disassembling. When assembling the device, screwing the screw in the wrong place may damage the device or its part. To avoid damage, the removed screws and individual pieces (as gaskets or brackets) must be laid out in the appropriate order, or the screws and their holes in the phone must be marked with colored markers.

Carefully remove the inter-board cable from the connector and turn the motherboard over.

Disconnect the loudspeakers wires connectors and an inter-board cable connector.

Using a screwdriver (Phillips 2.5 mm PH00), unscrew three screws securing the sub-board.

Remove the sub-board with a headphone jack socket and charging port.

Using a screwdriver (Phillips 2.5 mm PH00), unscrew three screws securing the small board.

Remove the small board with a microphone and buttons.

There is no problem removing two loudspeakers. Use a screwdriver Phillips 2.5 mm PH00 to unscrew four screws for two on each.