Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei Honor 7S (Huawei Honor 7S (DUA-L22)) with each step description and the required set of tools.
12751
Views
2
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the upper part.
Step 3.
Open the cover
Remove the cover.
Step 4.
Disconnect the battery connector
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the lower part.
Step 6.
Open the cover
Remove the lower cover.
Step 7.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 8.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
12751
Views
2
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
