Disassembly/Repair of the mobile device Huawei P20 Lite (Huawei P20 lite ANE-LX1, ANE-LX2, ANE-LX2J, ANE-LX3, ANE-AL00) with each step description and the required set of tools.

26055

Views

—

Share

5

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the trays

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

âš  Warning!

Do not push too hard this may cause damage.

Open the back cover

Step 2.

Open the back cover

Open the back cover.

âš  Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Remove the fingerprint sensor

Step 3.

Remove the fingerprint sensor

Pry up the fingerprint sensor and remove the back cover.

Unscrew the screws

Step 4.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.

Remove the bracket

Step 5.

Remove the bracket

Remove the bracket holding the connectors.

Remove the fingerprint sensor

Step 6.

Remove the fingerprint sensor

Pry up the connectors of battery and fingerprint sensor. Remove the fingerprint sensor cable.

Unscrew the screws

Step 7.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts.

Unscrew one screw

Step 8.

Unscrew one screw

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 short bolt.

Remove the loudspeaker

Step 9.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Disconnect the connectors

Step 10.

Disconnect the connectors

Disconnect connectors on the daughterboard.

Remove the sub-board

Step 11.

Remove the sub-board

Remove the daughterboard, also known as sub-board.

Remove the interconnect cable

Step 12.

Remove the interconnect cable

Disconnect the connector and remove the inter-board cable.

Remove the holder

Step 13.

Remove the holder

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the holder of the connector.

Unscrew the screws

Step 14.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts.

Remove the frame of cameras

Step 15.

Remove the frame of cameras

Remove the frame holding the cameras.

Disconnect the connectors

Step 16.

Disconnect the connectors

Disconnect connectors on the PCB.

Remove the cameras

Step 17.

Remove the cameras

Pry up the connectors and remove the assembly of two rear cameras.

Remove the front camera

Step 18.

Remove the front camera

Disconnect the connector on PCB, and remove the front (selfie) camera.

Remove the motherboard

Step 19.

Remove the motherboard

Remove the PCB.

In the display frame remained

Step 20.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has medium complexity and takes about 10 minutes in time. Our manual is suitable for all models Huawei P20 Lite or Huawei P20 lite ANE-LX1, ANE-LX2, ANE-LX2J, ANE-LX3, ANE-AL00 released for markets in different countries.
#instructions #Huawei #Huawei P20 Lite
Detailed disassembly instructions of Huawei P20 Lite in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

26055

Views

—

Share

5

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com