Recommended tools

Heat gun

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly/Repair of the mobile device Huawei P9 Lite (2017) (Huawei P9 Lite (2017) PRA-LA1 Huawei P8 Lite (2017) Huawei Honor 8 Lite, Huawei Nova Lite, Huawei GR3 (2017)) with each step description and the required set of tools.

7354

Views

Likes

—

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Open the back cover

Open the back cover.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 2.

Remove the fingerprint sensor

Carefully overturn the cover, disconnect the fingerprint sensor connector and remove it.

Step 3.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the brackets holds the connectors.

Step 4.

Disconnect the battery connector

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 5.

Remove the cable

Disconnect the connector on the PCB and remove the fingerprint sensor cable.

Step 6.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.

Step 7.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Step 8.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.

Step 9.

Remove the frame

Pry and remove the upper frame.

Step 10.

Disconnect the connectors

Disconnect connectors on the lower PCB.

Step 11.

Remove the sub-board

Remove the lower PCB.

Step 12.

Disconnect the connectors

Disconnect connectors on the PCB.

Step 13.

Remove the cameras

Disconnect connectors on the PCB and remove the main and front (selfie) cameras.

Step 14.

Remove the motherboard

Remove the PCB.

Step 15.

Remove the battery

Separate the battery.

⚠ Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 16.

In the display frame remained

Parts in the frame of the display module.

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has hard complexity and takes about 14 minutes in time. Our manual is suitable for all models Huawei P9 Lite (2017) or Huawei P9 Lite (2017) PRA-LA1 Huawei P8 Lite (2017) Huawei Honor 8 Lite, Huawei Nova Lite, Huawei GR3 (2017) released for markets in different countries.

#instructions #Huawei #Huawei P9 Lite (2017)