Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Lenovo A7000 with each step description and the required set of tools.
5338
Views
2
Likes
—
Share
13
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker).
Step 6.
Remove the protective film
Peel back the protective layer
Step 7.
Disconnect the connectors
Disconnect the coaxial cable connector and pry up vibration motor & microphone.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 10.
Remove the sub-board
Overturn the board, disconnect the connectors from the inside and remove it.
Step 11.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 12.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5338
Views
2
Likes
—
Share
13
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Lenovo instructions most liked by readers
New instructions
Check our
New Lenovo brand instructions on vrm24.com
