Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Lenovo Vibe X2 with each step description and the required set of tools.
5840
Views
3
Likes
—
Share
29
Questions
Step 1.
Remove the tray
Using the key tool, open the SIM card tray and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the frame of the phone.
Step 4.
Remove the bracket
Remove the brackets hold the connectors.
Step 5.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 6.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 7.
Remove the cameras
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
Step 8.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 9.
Remove the motherboard
Turn over PCB, disconnect the connector of the coaxial cable from the inside and remove the board.
Step 10.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5840
Views
3
Likes
—
Share
29
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Lenovo instructions most liked by readers
New instructions
Check our
New Lenovo brand instructions on vrm24.com
