Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device HTC Desire 728 (HTC Desire 728G) with each step description and the required set of tools.
5243
Views
1
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
âš Warning!
For careful separation, we recommend using a hairdryer. At the same time, it is necessary to heat carefully in order not to damage the surface of the device.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 22 bolts in the frame of the phone.
Step 3.
Open the mid-frame
Pry and remove the middle frame.
Step 4.
Remove the protective film
Remove the protective film and battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5.
Disconnect the connector
Disconnect the connector on the lower PCB.
Step 6.
Remove the sub-board
Remove the lower PCB.
Step 7.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.
Step 8.
Disconnect the connectors
Disconnect the connectors on PCB.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5243
Views
1
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top HTC instructions most liked by readers
New instructions
Check our
New HTC brand instructions on vrm24.com
