Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Micromax Bolt Q383 with each step description and the required set of tools.
3277
Views
0
Likes
—
Share
8
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Remove the battery. The battery model of Micromax Bolt Q383 is the same as the phone model.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 screws.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws in the PCB.
Step 6.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 7.
Turn over the PCB
Turn the PCB over.
Step 8.
Remove the motherboard
Disconnect the connector from the inside and remove the PCB.
Step 9.
Disconnect the connector
Disconnect the front (selfie) camera connector.
Step 10.
Remove the rear camera
Turn over the PCB, pry up the connector and remove the main camera.
Step 11.
Remove the front camera
Unstick the front (selfie) camera.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3277
Views
0
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Micromax instructions most liked by readers
New instructions
Check our
New Micromax brand instructions on vrm24.com
